Wash-Off Labels for Returnable Bottles: Specify Use and Release Separately
Record cold-service retention and the approved bottle-washing route separately when specifying wash-off labels for returnable beverage bottles.
#bottle-labels
How to Waterproof Bottle Labels: Check the Printed Proof
Check bottle-label material, print, finish and adhesive together, then record legibility, surface damage and adhesion under the intended water contact.
Easy-Peel vs. Removable Bottle Labels: Check Which Bond Releases
Separate a liner pop-up edge from a label that leaves the bottle, and leave material, dwell time and residue blank until a sample shows them.
Extended Content Labels: Proof the Opening and Reading Sequence
Record the closed cover, the first opening, each opened panel, and the reclose on the container before treating a flat artwork file as the reading order.
In-Mold Labels: Define the Container-Molding Handoff
Record the forming route, the moment the label enters the mold, and who approves the molded sample before reusing a finished-bottle label requirement.
Shrink Sleeve Bottle Labels: Map the Artwork From Proof to Bottle
Pair the bottle, film and artwork revisions, then follow key artwork and the seam from flat proof to unshrunk sleeve and shrunk bottle in one record.
AB 2249: A California Cannabis Label Artwork Checklist
Use California's AB 2249 signing announcement to review label imagery, record artwork decisions and identify timing questions for DCC or legal review.
Senoprint for Narrow-Web Labels: What to Verify Before Switching
Turn Stahl's Senoprint announcement into a paper-label trial brief covering substrate, protective topcoat, comparison samples and supporting documents.
UPM Asendo 80: A Food-Label Converter Evaluation Checklist
Evaluate UPM's Asendo 80 face-paper announcement through an identified label construction, supplier documents and a trial under your production conditions.
BOPP, PET and PE Bottle Labels: Compare Constructions
Compare identified film constructions against bottle rigidity, curves and squeezing, with supplier-grade evidence and unknown fields kept visible.
Bottle Label Bubbles, Wrinkles and Lifting: Record First
Distinguish bottle-label symptoms and timing, preserve sample identities, and plan one controlled comparison before choosing a cause or adjustment.
Clear vs. White Bottle Labels: Plan the Artwork Proof
Compare clear and white labels on the same bottle and fill, with transparent areas, white ink and viewing conditions recorded beside the artwork.
Clear Bottle Labels: The Historical Ethos Water Case
Separate the reported Ethos label and equipment facts from the bottle, artwork and application conditions a new project needs to verify.
Filling and Capping to Labeling: The Bottle Handoff
Record the filled, capped bottle surface, posture, spacing and contact areas at the labeling entrance before interpreting a label defect.
Inline vs. Rotary Labeling: Container Requirements
Define bottle support, orientation and label positions before comparing inline and rotary layouts, using the same identified container samples.
Pressure-Sensitive Bottle Labels: Record the Construction
Record face material, adhesive and liner separately, then connect the complete bottle-label construction to application and use conditions.
Small Cosmetic Bottle and Jar Labels: Define the Usable Zone
Map straight walls, shoulders and seams on small bottles and jars, then record blank-contour fit separately from construction and finished-print observations.